• Industrial Grade Line of Products
• Orange, heavy body, CPVC cement for use on pipe and fittings up to 12” (315 mm) diameter
• Industrial strength cement recommended for residential and commercial hot and cold water systems up to 180 °F (82 °C)
• Meets ASTM D2846 and F493

For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label

• Industrial Grade Line of Products
• Gray, heavy body, PVC / uPVC cement for use on all classes and schedules of PVC pipe and fittings with interference fit up to 12” (315 mm) diameter
• Industrial strength cement formulated for gap filling, recommended for plumbing, industrial, irrigation and electrical conduit
• Meets ASTM D2564

For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

• Clear, fast acting cleaner effectively removes oil and grease from the surfaces of PVC/uPVC, ABS and STYRENE pipe and fittings
• Highly recommended for use before priming of pipe and fittings

Apply liberal coat to the outer surface of the pipe end and the inner surface of the fitting socket using a dauber supplied with the can or other suitable applicator. Do not puddle primer into the socket. Unlike pipe cleaner do not wipe off primer. Apply cement according to the instructions on the label of cement while primer is still wet.

• Clear, regular body PVC / uPVC cement for use on pipe and fittings up to 4” (110 mm) for schedule 40
• To be used for plumbing, electrical conduit, non-pressure pool and spa and PVC foam core pipe
• Meets ASTM D2564

For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

• Clear, medium body, PVC / uPVC cement for use on pipe and fittings up to 6” (160 mm) diameter for schedule 40 and 4” (110 mm) for schedule 80
• To be used for plumbing, pressure/non-pressure applications, electrical conduit and PVC foam core
• Can be used without primer on non-pressure applications if local codes permit
• Meets ASTM D2564

For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.