
طلاء أسود عازل
بلاك عازل للمياه والرطوبة يمنع صدأ وتآكل المعادن

ACRYL-1001U
معجون أكريليك للسد والحشو فائق الجودة
يمكن الدهان عليه بعد جفافه - بدون رائحة يلتصق جيدا بالأسطح حتى الرطب منها دون الإحتياج الى برايمر لايسبب تآكل الأسطح حوله حتى المعدنية يتحمل حرارة من - 20° C الى + 75° C

FP SILICONE SEALANT
سيليكون سيلانت مقاوم للحریق
سیلیكون مقاوم للحریق مختبر حسب المواصفات العالمیة ● یقوم بالسد والحشو للفواصل من 5 الى 30 مم عرض ● وفي حالة إستخدام الفوم المقاوم للحریق معه یسد ویحشو حتى40 مم ● یقاوم الحرائق لمدة 180 دقیقة وإذا تم إستخدامه مع منتجات اخرى مقاومة للحریق تصل مدة المقاومة الى 240 دقیقة يتحمل حرارة من - 40° C الى + 120° C

ZINC-ALU SPRAY
زینك سبراي للجلفنة الباردة (فضي)
سبراي عبارة عن خلیط من الالمنیوم و الزینك ● یحمي من التآكل وعوامل التآكل الخارجیة ● ً یلصق جیدا علي الحدید و المسلح ● یستخدم في معالجة أماكن اللحامات و الحدید يتحمل حرارة من - 30° C الى + 200° C

FP PU HAND FOAM
فوم مقاوم للحریق مختبر حسب المواصفات العالمیة
یقوم بالسد والحشو للفواصل من 5 الى 30 مم عرض ● وفي حالة إستخدام السیلیكون المقاوم للحریق معه یسد ویحشو حتى 40 مم ● یقاوم الحرائق لمدة 120دقیقة وإذا تم إستخدامه مع منتجات اخرى مقاومة للحریق تصل مدة المقاومة الى 240 دقیقة يتحمل حرارة من - 40° C الى + 90° C

SILICONE-1001U
سيليكون سيلانت للسد والحشو واللصق
مقاوم للعوامل الجوية وأشعة الشمس فوق البنفسجية والرطوبة • شديد الإلتصاق بالزجاج والخشب والسيراميك والحديد • مقاوم للفطريات والبكتيريا ويحتفظ بمرونتة لمدى طويل يتحمل حرارة من - 40° C الى + 180° C

HYBRIFIX®
لاصق قوي ومرن و مالىء للفراغات
للإستعمال الداخلي والخارجي حیث أنه مقاوم للرطوبة وأشعة الشمس و كل العوامل الجویة ● لا ینكمش ولا یفقد مرونته خالي من المذیبات والأیزوسیانید والسیلیكون ● لایسبب تآكل المعادن - یتحمل الإھتزازات المیكانیكیة يتحمل حرارة من - 40° C الى + 90° C

PU FOAM
بولیوریثان فوم من مكون واحد قابل للتمدد
لاصق وعازل ومالئ للفراغات بین كل مواد البناء ● شدید الإلتصاق بالأسطح ویجف عن طریق رطوبة الجو ● له إستخدامات عدیدة كتثبیت الأبواب والنوافذ والعزل يتحمل حرارة من - 40° C الى + 90° C

HIGH TACK
اللاصق المغناطیسي : لاصق شدید القوة ویحقق لصق فوري بمجرد إستخدامه
لا یحتاج أى نوع من وسائل التثبیت أثناء عملیة الجفاف ● خواص میكانیكیة عالیة ● خالي من المذیبات والأیزوسیانید والسیلیكون ● یبقى مرن لمدة طویلة ● یصلح لكل أنواع الأسطح ) زجاج - سیرامیك - نحاس - ألومنیوم - خشب وعلى الأسطح المدھونة وغیر المدھونة) يتحمل حرارة من - 40° C الى + 90° C

E-Z Weld 786 CPVC CEMENT
Application
- Industrial Grade Line of Products
- Orange, heavy body, CPVC cement for use on pipe and fittings up to 12” (315 mm) diameter
- Industrial strength cement recommended for residential and commercial hot and cold water systems up to 180 °F (82 °C)
- Meets ASTM D2846 and F493
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label

E-Z Weld 216 PVC CEMENT
Application
- Industrial Grade Line of Products
- Gray, heavy body, PVC / uPVC cement for use on all classes and schedules of PVC pipe and fittings with interference fit up to 12” (315 mm) diameter
- Industrial strength cement formulated for gap filling, recommended for plumbing, industrial, irrigation and electrical conduit
- Meets ASTM D2564
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

E-Z Weld 214 PIPE CLEANER
Application
- Clear, fast acting cleaner effectively removes oil and grease from the surfaces of PVC/uPVC, ABS and STYRENE pipe and fittings
- Highly recommended for use before priming of pipe and fittings
Apply liberal coat to the outer surface of the pipe end and the inner surface of the fitting socket using a dauber supplied with the can or other suitable applicator. Do not puddle primer into the socket. Unlike pipe cleaner do not wipe off primer. Apply cement according to the instructions on the label of cement while primer is still wet.

E-Z Weld 205 PVC CEMENT
Application
- Clear, regular body PVC / uPVC cement for use on pipe and fittings up to 4” (110 mm) for schedule 40
- To be used for plumbing, electrical conduit, non-pressure pool and spa and PVC foam core pipe
- Meets ASTM D2564
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

WL740 ZINC-RICH GALVANIZING COMPOUND
Uses
For use in automotive, marine, nuclear facilities, power plants and refineries. To be used on industrial tanks, piping, welded joints, bridges, farm equipment, fences, wrought iron, gutters, structural steel, transmission towers, and galvanized surfaces.
المميزات
- 97% pure zinc dust
- Stops rust
- Low VOC
- Non-sagging formula

WL744 / WL745 WELDING DEFECT DETECTION SYSTEM – PENETRANT & DEVELOPER
Uses
Turbine blades, molds, structural beams, pipes, and more.
المميزات
- Easy-to-use 2-step system ensures quality inspections
- Detects and locates cracks and defects in welds, metals, and more
- Requires both Penetrant (WL744) & Developer (WL745)

LU620 ANTI-SEIZE COMPOUND
Uses
Threaded fittings, sprockets and chains, splines and worm gears, manifold studs and bolts, brake cams and pins, rig drives, casting equipment, winches, conveyors, and valve shafts. Note: Not to be used with oxygen systems.
المميزات
- Prevents seizure, galling, and fusion
- Prevents corrosion
- Features brush top option

LU711 THE PROTECTOR ALL-PURPOSE LUBRICANT
Uses
All metal surfaces, nuts and bolts, operating controls, electrical wiring, ignition systems, circuitry, connectors
المميزات
- Penetrates & prevents rust
- Displaces moisture & lubricates
- Contains no silicone

MR361 MOLD PROTECTANT
Uses
All metal molds, pins, dies and machinery.
المميزات
- Prevents rust and contamination
- Non-staining formula
- Excellent humidity resistance
- Excellent for outdoor storage

MR351 MOLD CLEANER
Uses
Metal molds, machinery, electrical and electronic equipment, pins, and mechanical equipment.
المميزات
- Non-abrasive
- Neutralizes fingerprints
- Equipped with SPRAY ANYWAY™ valve
- Removes residual resin, oils and grease deposites

CD757 HEAVY DUTY CITRUS DEGREASER
Uses
Tools, equipment, concrete floors, walls, formica, fiber glass, wood, ceramic tile, aluminum, glass and some plastics.
المميزات
- Biodegradable, Non-Toxic
- No Chlorinated Solvents
- Pleasant Citrus Scent

EL2846 NON-CHLORINATED ELECTRICAL DEGREASER
Uses
Electric motors, generators, air tools, brakes, clutches, chains, sprockets, wire rope, dies, molds, relays, radar equipment, material handling equipment, and air conditioners.
المميزات
- Non-Flammable, Non-Chlorinated
- Fast Evaporating
- No Hazardous Air Pollutants
- Dielectric Strength 15,000 volts

LU777 OUTDOOR METAL PROTECTANT
Uses
Bodies and frames of vehicles and machines, storage tanks and containers, castings, industrial parts and machines, molds, cables, generators, marine engines and parts, electrical equipment, sheet steel, oil field equipment, threads, locks, dies, gears
المميزات
- Penetrates and displaces moisture
- Prevents rust
- Protects From salt water
- 24 month durability

EL601 RED INSULATING VARNISH
Uses
Motor windings, sealing electrical & electronic components, switchboards, commutator ends, field coils, transformers, armatures, stator windings, rings and frames, and bus bars.
المميزات
- Air dries in 10 minutes or less
- Meets Class F requirements
- Resists oil, moisture, acids and alkalis

LU103 RUST BREAKER® PENETRANT
Uses
Rusted or frozen lugs and bolts, tight-fitting parts, repair work, general overhaul, phosphated and non-phosphated machined parts, automotive parts, crank shafts and other metal components
المميزات
- Quickly loosens rust
- Will not harm painted surfaces
- Non-flammable
- Penetrant, water displacer and rust inhibitor, all in a single application

EL2001 ELECTRONIC CONTACT CLEANER & PROTECTANT
Uses
Switches, relays, timers, signals, transmitters, condensers, transistors, microphones, panel boards, circuit breakers, contacts, meters, recievers, speakers, and coils.
المميزات
- Protects against corrosion
- Low-conductivity for use on energized equipment
- Eliminates noise due to dust and dirt

EL2206 ELECTRONIC CONTACT CLEANER – ELECTRO WIZARD
Uses
Printed circuits, relays & switches, meters, radar equipment, x-ray equipment, precision instruments, cameras, office machines, timing devices, hydraulic & missile fuel systems, satellite communication equipment, electronic games, tv & video equipment, computer systems & memory devices.
المميزات
- Residue Free
- Alternative to HCFC – 141B
- Equipped with an Extension Tube for Hard-to-Reach Areas

Velcro Disk with 7 holes
Technical Details
Size | 100 Pack |
Item Package Quantity | 1 |
Grit Rating | 150.00 |
Grit Description | 150 |
Product description
6″ x 8 Hole vacuum discs are made with Aluminum Oxide grain containing a non-loading stearate to reduce clogging. The hook-and-loop grip backing on the disc allows for longevity and a speedy disc change. Grits 40-120 are made on durable “D” weight paper. Grits 150-600 are made on flexible “C” weight paper. All discs are strong and excellent for sanding profiled workpieces. Ideal for finish sanding wood, paint, metal, plastic, and solid surface. These discs are used for dry sanding E-coat, primer, and paint finish. Ideal for use processing new generation water-based lacquers. Commonly used within the automotive, woodworking, and solid surface markets. To use, attach disc to your appropriate back up pad attached to an orbital or DA disc sander. Discs are available in Grits 40 to 800 and in Packs of 25, 50 or 100 discs.
- 6 Inch x 8 Hole Hook and Loop grip backing on sanding disc gives flexibility, durability and speed
- Open coat & stearate topcoat reduces clogging, even on “sticky” materials
- Premium Aluminum Oxide grain with flexible “C” and durable “D” weight paper with high tear resistance
- Ideal for finish sanding wood, paints, metal & plastic, dry sanding of E-coat, primer & paint finish
- Also ideal for use processing new generation water-based lacquers

Velcro discs With No holes
Technical Details
Size | 25 Pack |
Item Package Quantity | 1 |
Grit Rating | 80.00 |
Grit Description | 80 |
- Individually cut discs with Hook and Loop Grip
- Premium Aluminum Oxide grain with heavy duty “E” weight paper backing
- Semi open coat reduces clogging
- Resin over resin bond for consistent reduction of abrasive grain
- Ideal for sanding and stripping paints, pigmented lacquers, primers, sealers, and acid cured lacquers

Emery Cloth Roll 60 grit 50mm x 5000mm
Product description
Ideal for a variety of Demanding Manual Grinding Operations on metal such as edges, profiles and hollow grooves. Cleaning of machine parts, cylinders and shafts. Cleansing of contact surfaces. The Fully Resin Bonding and Close Coat Leads to Superior Grinding Characteristics. Only the Highest Quality Aluminium Oxide Grain Used.
- Flexible Cloth Aluminium Oxide Abrasive Roll
- Close Coat Resin Over Resin
- Highest Quality Aluminium Oxide
- P40 – P600
- 65mm Thick
Technical Details
Part Number | P60 – 5M 40mm |
Product Dimensions | 500 x 4 x 0.2 cm |
Manufacturer reference | P60 – 5M 40mm |
Grit Description | Course |
Batteries included? | No |
Batteries Required? | No |

Dry Sanding Abrasives sheets For Wood
Technical Details
Item Weight | 18.1 g |
Product Dimensions | 30 x 24 x 0.3 cm |
Batteries included? | No |
Batteries Required? | No |
- 230mm*280mm Full size
- Pack of 3 sheets Grit(1 x #3000, 1 x #5000, 1 x #7000)
- Nomal fine, Super fine and ultra super mirror finish sheets pack, Made in Germany
- Premium WATERPROOF Flexible
- Silky texture polishing for Wood, Metal, Lacquer, Plastics, Glass, Stone, Leather Etc

طلاء أسود عازل
بلاك عازل للمياه والرطوبة يمنع صدأ وتآكل المعادن


ACRYL-1001U
معجون أكريليك للسد والحشو فائق الجودة
يمكن الدهان عليه بعد جفافه - بدون رائحة يلتصق جيدا بالأسطح حتى الرطب منها دون الإحتياج الى برايمر لايسبب تآكل الأسطح حوله حتى المعدنية يتحمل حرارة من - 20° C الى + 75° C

FP SILICONE SEALANT
سيليكون سيلانت مقاوم للحریق
سیلیكون مقاوم للحریق مختبر حسب المواصفات العالمیة ● یقوم بالسد والحشو للفواصل من 5 الى 30 مم عرض ● وفي حالة إستخدام الفوم المقاوم للحریق معه یسد ویحشو حتى40 مم ● یقاوم الحرائق لمدة 180 دقیقة وإذا تم إستخدامه مع منتجات اخرى مقاومة للحریق تصل مدة المقاومة الى 240 دقیقة يتحمل حرارة من - 40° C الى + 120° C

ZINC-ALU SPRAY
زینك سبراي للجلفنة الباردة (فضي)
سبراي عبارة عن خلیط من الالمنیوم و الزینك ● یحمي من التآكل وعوامل التآكل الخارجیة ● ً یلصق جیدا علي الحدید و المسلح ● یستخدم في معالجة أماكن اللحامات و الحدید يتحمل حرارة من - 30° C الى + 200° C

FP PU HAND FOAM
فوم مقاوم للحریق مختبر حسب المواصفات العالمیة
یقوم بالسد والحشو للفواصل من 5 الى 30 مم عرض ● وفي حالة إستخدام السیلیكون المقاوم للحریق معه یسد ویحشو حتى 40 مم ● یقاوم الحرائق لمدة 120دقیقة وإذا تم إستخدامه مع منتجات اخرى مقاومة للحریق تصل مدة المقاومة الى 240 دقیقة يتحمل حرارة من - 40° C الى + 90° C

SILICONE-1001U
سيليكون سيلانت للسد والحشو واللصق
مقاوم للعوامل الجوية وأشعة الشمس فوق البنفسجية والرطوبة • شديد الإلتصاق بالزجاج والخشب والسيراميك والحديد • مقاوم للفطريات والبكتيريا ويحتفظ بمرونتة لمدى طويل يتحمل حرارة من - 40° C الى + 180° C


HYBRIFIX®
لاصق قوي ومرن و مالىء للفراغات
للإستعمال الداخلي والخارجي حیث أنه مقاوم للرطوبة وأشعة الشمس و كل العوامل الجویة ● لا ینكمش ولا یفقد مرونته خالي من المذیبات والأیزوسیانید والسیلیكون ● لایسبب تآكل المعادن - یتحمل الإھتزازات المیكانیكیة يتحمل حرارة من - 40° C الى + 90° C


PU FOAM
بولیوریثان فوم من مكون واحد قابل للتمدد
لاصق وعازل ومالئ للفراغات بین كل مواد البناء ● شدید الإلتصاق بالأسطح ویجف عن طریق رطوبة الجو ● له إستخدامات عدیدة كتثبیت الأبواب والنوافذ والعزل يتحمل حرارة من - 40° C الى + 90° C


HIGH TACK
اللاصق المغناطیسي : لاصق شدید القوة ویحقق لصق فوري بمجرد إستخدامه
لا یحتاج أى نوع من وسائل التثبیت أثناء عملیة الجفاف ● خواص میكانیكیة عالیة ● خالي من المذیبات والأیزوسیانید والسیلیكون ● یبقى مرن لمدة طویلة ● یصلح لكل أنواع الأسطح ) زجاج - سیرامیك - نحاس - ألومنیوم - خشب وعلى الأسطح المدھونة وغیر المدھونة) يتحمل حرارة من - 40° C الى + 90° C

E-Z Weld 786 CPVC CEMENT
Application
- Industrial Grade Line of Products
- Orange, heavy body, CPVC cement for use on pipe and fittings up to 12” (315 mm) diameter
- Industrial strength cement recommended for residential and commercial hot and cold water systems up to 180 °F (82 °C)
- Meets ASTM D2846 and F493
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label

E-Z Weld 216 PVC CEMENT
Application
- Industrial Grade Line of Products
- Gray, heavy body, PVC / uPVC cement for use on all classes and schedules of PVC pipe and fittings with interference fit up to 12” (315 mm) diameter
- Industrial strength cement formulated for gap filling, recommended for plumbing, industrial, irrigation and electrical conduit
- Meets ASTM D2564
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

E-Z Weld 214 PIPE CLEANER
Application
- Clear, fast acting cleaner effectively removes oil and grease from the surfaces of PVC/uPVC, ABS and STYRENE pipe and fittings
- Highly recommended for use before priming of pipe and fittings
Apply liberal coat to the outer surface of the pipe end and the inner surface of the fitting socket using a dauber supplied with the can or other suitable applicator. Do not puddle primer into the socket. Unlike pipe cleaner do not wipe off primer. Apply cement according to the instructions on the label of cement while primer is still wet.

E-Z Weld 205 PVC CEMENT
Application
- Clear, regular body PVC / uPVC cement for use on pipe and fittings up to 4” (110 mm) for schedule 40
- To be used for plumbing, electrical conduit, non-pressure pool and spa and PVC foam core pipe
- Meets ASTM D2564
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.

WL740 ZINC-RICH GALVANIZING COMPOUND
Uses
For use in automotive, marine, nuclear facilities, power plants and refineries. To be used on industrial tanks, piping, welded joints, bridges, farm equipment, fences, wrought iron, gutters, structural steel, transmission towers, and galvanized surfaces.
المميزات
- 97% pure zinc dust
- Stops rust
- Low VOC
- Non-sagging formula

WL744 / WL745 WELDING DEFECT DETECTION SYSTEM – PENETRANT & DEVELOPER
Uses
Turbine blades, molds, structural beams, pipes, and more.
المميزات
- Easy-to-use 2-step system ensures quality inspections
- Detects and locates cracks and defects in welds, metals, and more
- Requires both Penetrant (WL744) & Developer (WL745)

LU620 ANTI-SEIZE COMPOUND
Uses
Threaded fittings, sprockets and chains, splines and worm gears, manifold studs and bolts, brake cams and pins, rig drives, casting equipment, winches, conveyors, and valve shafts. Note: Not to be used with oxygen systems.
المميزات
- Prevents seizure, galling, and fusion
- Prevents corrosion
- Features brush top option

LU711 THE PROTECTOR ALL-PURPOSE LUBRICANT
Uses
All metal surfaces, nuts and bolts, operating controls, electrical wiring, ignition systems, circuitry, connectors
المميزات
- Penetrates & prevents rust
- Displaces moisture & lubricates
- Contains no silicone

MR361 MOLD PROTECTANT
Uses
All metal molds, pins, dies and machinery.
المميزات
- Prevents rust and contamination
- Non-staining formula
- Excellent humidity resistance
- Excellent for outdoor storage

MR351 MOLD CLEANER
Uses
Metal molds, machinery, electrical and electronic equipment, pins, and mechanical equipment.
المميزات
- Non-abrasive
- Neutralizes fingerprints
- Equipped with SPRAY ANYWAY™ valve
- Removes residual resin, oils and grease deposites

CD757 HEAVY DUTY CITRUS DEGREASER
Uses
Tools, equipment, concrete floors, walls, formica, fiber glass, wood, ceramic tile, aluminum, glass and some plastics.
المميزات
- Biodegradable, Non-Toxic
- No Chlorinated Solvents
- Pleasant Citrus Scent

EL2846 NON-CHLORINATED ELECTRICAL DEGREASER
Uses
Electric motors, generators, air tools, brakes, clutches, chains, sprockets, wire rope, dies, molds, relays, radar equipment, material handling equipment, and air conditioners.
المميزات
- Non-Flammable, Non-Chlorinated
- Fast Evaporating
- No Hazardous Air Pollutants
- Dielectric Strength 15,000 volts

LU777 OUTDOOR METAL PROTECTANT
Uses
Bodies and frames of vehicles and machines, storage tanks and containers, castings, industrial parts and machines, molds, cables, generators, marine engines and parts, electrical equipment, sheet steel, oil field equipment, threads, locks, dies, gears
المميزات
- Penetrates and displaces moisture
- Prevents rust
- Protects From salt water
- 24 month durability

EL601 RED INSULATING VARNISH
Uses
Motor windings, sealing electrical & electronic components, switchboards, commutator ends, field coils, transformers, armatures, stator windings, rings and frames, and bus bars.
المميزات
- Air dries in 10 minutes or less
- Meets Class F requirements
- Resists oil, moisture, acids and alkalis

LU103 RUST BREAKER® PENETRANT
Uses
Rusted or frozen lugs and bolts, tight-fitting parts, repair work, general overhaul, phosphated and non-phosphated machined parts, automotive parts, crank shafts and other metal components
المميزات
- Quickly loosens rust
- Will not harm painted surfaces
- Non-flammable
- Penetrant, water displacer and rust inhibitor, all in a single application

EL2001 ELECTRONIC CONTACT CLEANER & PROTECTANT
Uses
Switches, relays, timers, signals, transmitters, condensers, transistors, microphones, panel boards, circuit breakers, contacts, meters, recievers, speakers, and coils.
المميزات
- Protects against corrosion
- Low-conductivity for use on energized equipment
- Eliminates noise due to dust and dirt

EL2206 ELECTRONIC CONTACT CLEANER – ELECTRO WIZARD
Uses
Printed circuits, relays & switches, meters, radar equipment, x-ray equipment, precision instruments, cameras, office machines, timing devices, hydraulic & missile fuel systems, satellite communication equipment, electronic games, tv & video equipment, computer systems & memory devices.
المميزات
- Residue Free
- Alternative to HCFC – 141B
- Equipped with an Extension Tube for Hard-to-Reach Areas

Velcro Disk with 7 holes
Technical Details
Size | 100 Pack |
Item Package Quantity | 1 |
Grit Rating | 150.00 |
Grit Description | 150 |
Product description
6″ x 8 Hole vacuum discs are made with Aluminum Oxide grain containing a non-loading stearate to reduce clogging. The hook-and-loop grip backing on the disc allows for longevity and a speedy disc change. Grits 40-120 are made on durable “D” weight paper. Grits 150-600 are made on flexible “C” weight paper. All discs are strong and excellent for sanding profiled workpieces. Ideal for finish sanding wood, paint, metal, plastic, and solid surface. These discs are used for dry sanding E-coat, primer, and paint finish. Ideal for use processing new generation water-based lacquers. Commonly used within the automotive, woodworking, and solid surface markets. To use, attach disc to your appropriate back up pad attached to an orbital or DA disc sander. Discs are available in Grits 40 to 800 and in Packs of 25, 50 or 100 discs.
- 6 Inch x 8 Hole Hook and Loop grip backing on sanding disc gives flexibility, durability and speed
- Open coat & stearate topcoat reduces clogging, even on “sticky” materials
- Premium Aluminum Oxide grain with flexible “C” and durable “D” weight paper with high tear resistance
- Ideal for finish sanding wood, paints, metal & plastic, dry sanding of E-coat, primer & paint finish
- Also ideal for use processing new generation water-based lacquers

Velcro discs With No holes
Technical Details
Size | 25 Pack |
Item Package Quantity | 1 |
Grit Rating | 80.00 |
Grit Description | 80 |
- Individually cut discs with Hook and Loop Grip
- Premium Aluminum Oxide grain with heavy duty “E” weight paper backing
- Semi open coat reduces clogging
- Resin over resin bond for consistent reduction of abrasive grain
- Ideal for sanding and stripping paints, pigmented lacquers, primers, sealers, and acid cured lacquers

Emery Cloth Roll 60 grit 50mm x 5000mm
Product description
Ideal for a variety of Demanding Manual Grinding Operations on metal such as edges, profiles and hollow grooves. Cleaning of machine parts, cylinders and shafts. Cleansing of contact surfaces. The Fully Resin Bonding and Close Coat Leads to Superior Grinding Characteristics. Only the Highest Quality Aluminium Oxide Grain Used.
- Flexible Cloth Aluminium Oxide Abrasive Roll
- Close Coat Resin Over Resin
- Highest Quality Aluminium Oxide
- P40 – P600
- 65mm Thick
Technical Details
Part Number | P60 – 5M 40mm |
Product Dimensions | 500 x 4 x 0.2 cm |
Manufacturer reference | P60 – 5M 40mm |
Grit Description | Course |
Batteries included? | No |
Batteries Required? | No |

Dry Sanding Abrasives sheets For Wood
Technical Details
Item Weight | 18.1 g |
Product Dimensions | 30 x 24 x 0.3 cm |
Batteries included? | No |
Batteries Required? | No |
- 230mm*280mm Full size
- Pack of 3 sheets Grit(1 x #3000, 1 x #5000, 1 x #7000)
- Nomal fine, Super fine and ultra super mirror finish sheets pack, Made in Germany
- Premium WATERPROOF Flexible
- Silky texture polishing for Wood, Metal, Lacquer, Plastics, Glass, Stone, Leather Etc